banner



How To Change The Toner On A Brother Printer

i.  Brand certain the motorcar is powered on.

2.  Open up the front cover, then go out the machine turned on for 10 minutes for the internal fan to cool the internal parts of the machine that are extremely hot.

Open Front Cover

hot icon Afterwards you take simply used the auto, some internal parts will be extremely hot.  Wait for the automobile to absurd down before you touch the internal parts of the automobile.

three.  Remove the pulsate unit and toner cartridge assembly.

note icon Brother recommends that y'all place the pulsate unit and/or the toner cartridge on a clear, flat, level, stable surface with a sheet of disposable paper or cloth underneath it in case toner is accidentally spilled or scattered.

important icon Handle the toner cartridge advisedly.  If toner scatters on easily or clothing, immediately wipe or wash it off with cold water.

Remove drum and toner assembly

4.  Button downwards the green lock lever and take the toner cartridge out of the drum unit.

Remove toner from drum

5.  Unpack the new toner cartridge.  Hold the cartridge level with both easily and gently milkshake information technology from side-to-side several times to spread the toner evently within.

Gently rock toner from side to side

6.  Remove the protective cover.

Remove protective cover from the toner

7.  Put the new toner cartridge firmly into the drum into you hear it lock into place.  If y'all place it in properly, the light-green lock lever volition lift automatically.

Install toner into drum

8.  Clean the corona wire within the pulsate unit of measurement by gently sliding the greenish tab from left to right and right to left several times.

note icon Be sure to return the tab to the home position (▲).  If you don't, printed pages may take a vertical stripe.

Clean corona wire

nine.  Install the pulsate unit and toner cartridge assembly back into the automobile.  Close the forepart embrace.

note icon After replacing the toner cartridge, don't turn off the machine'due south power switch or open up the front encompass until the LCD clears the "Please Wait" message and returns to Set up mode.

Install drum and toner assembly and close front cover

Source: https://help.brother-usa.com/app/answers/detail/a_id/77953/~/how-to-replace-or-install-the-toner-cartridge

Posted by: alvarezhourgen39.blogspot.com

0 Response to "How To Change The Toner On A Brother Printer"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel